Vegetable oil recycling machine

Application of Auxiliary Machine For Oil Press:
peanut kernel, sesame seeds, soybean,(almond)Apricot kernel, pumpkin seed kernel,
Sunflower kernel,Camellia seed kernel,rapeseed, flaxseed,Fire hemp seed,pinenut kernel. etc.
Features of Auxiliary Machine For Oil Press:
1.Screw Oil Press/Cold Oil
2.Household Equipment
3.Stainless Steel Material
4.Lower Price

Hydration Deguming & Alkali Refining Deacidification Process
Neutralization: the crude oil is output by the oil feed pump from the oil tank, and next enters the crude oil heat exchanger to recover part of heat after metering and then is heated to the required temperature by the heater. After that, the oil is mixed with the metered phosphoric acid or citric acid from phosphate tank in the gas mixture (M401), and then enters the conditioning tank (R401) to make the non-hydratable phospholipids in oil change into the hydratable phospholipids. Add the alkali for neutralization, and the alkali quantity and alkali solution concentration depend on the quality of the crude oil. Through the heater, the neutralized oil is heated to the temperature (90°C) suitable for centrifugal separation to remove the phospholipids, Auxiliary Machine For Oil PressA and other impurities in the crude oil. Then the oil goes to the washing process.

Washing: there is still about 500ppm soap in the neutralized oil from the separator. To remove the remaining soap, add into the oil about 5~8% hot water, with water temperature 3~5 °C higher than the oil generally. To achieve more stable washing effect, add phosphoric acid or citric acid when washing. The re-mixed oil and water in the mixer is heated to 90-95°C by the heater, and then enters the wash separator to separate the remaining soap and most water. The water with soap and oil enters into oil separator to separate out oil in the water. Further catch the oil outside, and the waste water is discharged to the sewage treatment station.
Vacuum drying stage: there is still moisture in the oil from the wash separator, and the moisture will affect the stability of the oil. So the oil at 90°C should be sent to vacuum drier to remove the moisture, and then the dehydrated oil goes to the decoloring process. Finally, pump out the dry oil by canned pump.If you are interested in our company,please feel free to contact Ms. Myra for a quotation,(Tel/whatsapp:0086-18363092712, Email:sales2@ldfoodmachine.com,Skype:leaderfoodmachine2).You will get superior service,and Shandong Leader Machinery Co.,Ltd. produce Vegetable oil recycling machine with high quality, high performance and the best prices.

Continuous Refining Decoloring Process
The main function of decoloring process is to remove oil pigment, residual soap grain and metal ions. Under negative pressure, the mechanical mixing method combined with steam mixing will improve the decoloring effect.
The degummed oil firstly enters into the heater to be heated to the appropriate temperature (110°C), and then goes to the bleaching earth mixing tank. The bleaching earth is delivered from the low bleaching box to the temporary tank by wind. The bleaching earth is added by automatic metering and is interlockingly controlled with the oil.
The oil mixed with the bleaching earth overflows into the continuous decolorizer, which is stirred by non-powered steam. The decolored oil enters into the two alternate leaf filters to be filtered. Then the filtered oil enters the decolored oil storage tank through the security filter. The decolored oil storage tank is designed as the vacuum tank with the nozzle inside, so as to prevent the decolored oil contacting with the air and influencing its peroxide value and color reversion.

Specifications

vegetable oil extractor
1.automatic control
2.advanced technology
3.negative evaporation extractor

Vegetable oil recycling machine

Vegetable oil extractor is divided into three types :

1. Towline extractor : The amount of processing is≥ 7000T/D .

2. Ring extractor : The amount of processing is ≥3000T/D.

3.Rotocel extractor: The amount of processing is ≤1500T/D.

The towline extractor working principle of leaching :

1. After pretreatment of the oil into the leaching, solvent (n-hexane) will be sprayed on the surface of the oil in the oil, most of the oil will be solvent extraction.

The oil concentration of the first funnel is relatively high, generally 60%-65%. Oil is directly pumped.

2. Oil after the second funnel, solvent will again sprayed on oil, again leaching, oil concentration and mixed oil obtained by solvent content is lower, more and more high.

3. Oil is shipped out extractor.

After leaching will get two products :

1. Mixed oil (oil and solvent) : Mixed oil first enters the first evaporation equipment, steam enters from the equipment below, mixed oil and steam full contact. The first evaporation in 0.006-0.08Mpa negative condition. The oil temperature is 105-110 °C. Then enter the second evaporation, the same process.

2. The cake containing solvents : Solvent containing cake steamed into the offline, two layers of steaming offline is preparing to break free, full and cake contact, indirect heating of cake, then is Breathable layer -- desolventizing layer -- drying layer -- cooling layer

The last step leaching :

Steamed out of the solvent into the condenser for cooling, cannot be condensed gas into paraffin recovery system, and then enters the analytical column to paraffin absorption solvents, gas separation.

Advantage of our essential oil extractor :

1.full negative pressure evaporation

2.paraffin recycling equipment

3.equipment are inhigh quality,advanced technology

4.high safety,interlocking control

5.automatic control,stable operation

6.low oil residue ,low consumposition and high quality final products

7.wide range production:10-3000T/D

Our cetificates ,trustworthy

If you have any inquiry,don't hesitate to contact me ,the best service in the industrtry!

Contact:Annie

Tel:+86 15237168511

Skype:goldpenguin9713

Shandong Leader Machinery Co.,Ltd. is one of the leading Manufacturers and Suppliers of Vegetable oil recycling machine.Shandong Leader Machinery Co.,Ltd. manufacture Vegetable oil recycling machine making machine using cutting-edge technology, Shandong Leader Machinery Co.,Ltd. have many kinds of Auxiliary Machine For Oil Press for you reference,such as Vegetable oil recycling machine ,Shandong Leader Machinery Co.,Ltd. can meet your different requirement in Auxiliary Machine For Oil Press.Welcome to contact Shandong Leader Machinery Co.,Ltd.,contact name:Ms.Myra for a quotation
(Tel/whatsapp:0086-18363092712, Email:sales2@ldfoodmachine.com,Skype:leaderfoodmachine2).Welcome to send us your enquiry about capacity for Vegetable oil recycling machine, inform us raw material you want to use for Vegetable oil recycling machine,and specific requirements for Vegetable oil recycling machine.Shandong Leader Machinery Co.,Ltd. will provide you best solution for your project about Auxiliary Machine For Oil Press.