canadian Hot sale soybean oil manufacturers

Shandong Leader Machinery Co.,Ltd. cold and hot amphibious screw oil press machine is a new research improvement product.Palm Fruit Processing Line is for oil extraction from oil-bearing materials,such as rapeseed,peanut,tea seed,soybean, sunflower seed,shea butter,palm kernel and so on.Equipped with micro-electrical control,infrared heating and filtration system,canadian Hot sale soybean oil manufacturers can press oil through cold press and hot press. Pour raw material to the machine,Shandong Leader Machinery Co.,Ltd. can get pure oil which can be eaten directly.canadian Hot sale soybean oil manufacturers is very suitable for individual users.

The specificaitons of canadian Hot sale soybean oil manufacturers:
(1).Cleaning: Our vibration screen and destoner will Remove the raw material peanut in various impurities, such as: iron, stones, clump, such as the plant leaf, clean up after the raw material peanut impurity content should not exceed 0.2%.
(2).Crushing: Oil seed is crushed into 6-8 pieces. In order to meet the requirements of crushing, the peanut is suitable for crushing with the moisture of 7% to 12%.
(3). Softening: The purpose of softening is to adjust the moisture and temperature of oil, and make it soft.
(4).Flaking process: Rolling raw material into flakes, and the purpose is to increae surface area, destroy the peanut cell tissue, shorten the way of oil out from cake.
(5).Drying: Adjust moisture of rice bran to meet the requirement of going to extraction process.
(6).Cooking process: use steam cooking, inject direct steam and cook the flakes to meet the requirement of oil press.

High Quality 50Tons Soybean Oil Press Machine

Technical Process Canadian soybean oil manufacturers

Main Equipment Canadian soybean oil manufacturers

1.Cleaning machine

In order to make good quality soybean oil and oil cake, and improve soybean oil output, the cleaning machine is always used in the pretreatment process to remove the impurities,such as crop stalk, stone, dust, magnetic metal and so on.

2.Crusher

After cleaning, the soybean shall be crushed by crusher, in order to make the soybean granularity smaller,`and adjust the oil cake thickness,thus creating a good condition for oil extraction.

3.Softening kettle

Softening kettle is used to adjust the water content and temperature of soybean, to increase the plasticity of soybean, so it can reduce the powder and glue stick phenomenon and guarantee the good quality of flakers when flaking,

4.Flaker

The Flaker is used to change the soybean from granularity into flakiness, and destroy cell wall of soybean, thus shorten the oil outlet distance. When flaking, the soybean flakiness thickness must be even, the size is suitable, powder degree is low, and also with mechanical strength.

5.Cooker

The purpose of cooking is to make the protein of soybean cell wall degenerated and then aggregated because of heated, increase the permeability of cell wall, and decrease the viscosity of oil, thus make oil come out easily, to make small oil drops into big oil drops.

6.Oil press

The advantage of using press method to make oil is that the support equipment is less, it is suitable for various oilseed crops,such as sunflower, soybean, groundnut,sesame,rapeseed and so on. The production line is very flexible, the oil quality is very good with light color and good flavor.

1. Introduction

(1) Function: Edible oil extraction machine is an oil extractor through soaking or spraying pre-pressed cake by a certain organic solvent. The principle of this part is the different solubility of solvent.

(2) Use range: Edible oil solvent extraction fits for pre-press extraction of high oil- content materials and direct once time extraction of low-oil-content materials.

(3) Main parts: The edible oil extraction making series includes rotary extractor, toaster, 1st evaporator, 2nd evaporator, stripping tower, condenser, etc.

2. Main parts function

(1) Solvent pumps: continuously spray solvent to the rotary-typr extractor.

(2) Roary extractor: spray and soak the pre-pressed cake with solvent so that oil fats can be dissolved in solvent (form miscella). After processing, you can get wet meal and miscella (mixed oil).

(3) DTDC: used to separate the solvent from the wet meal.

(4) Miscella tank 1st: pump the miscella ( oil with solvent) into the miscella 1st, then add 10% saline water to it. The phospholipid and impurities in the miscella will react with the saline water, at last the reactant precipitate, reaching the goal of purifying.

(5) Miscella tank 2nd: the purified miscella will be pumped into it.

(6) Miscella stripping: it will remove the remaining solvent in miscella. And the solvent will be discharged to condenser for recycling.

(7) Condensers: used to cooling the solvent gas separated from the wet meal and miscella for recycling.

3. Main Process

(1) The material (for pretreatment) is sent to rotary extraction by the scraper conveyor. The material will extracted by the solvent or mix oil. After this step, we will get meal and mix oil.

(2) Meal is send to toaster. Through the toaster, the solvent in the meal will seperate from the meal.The solvent goes to condenser and is recycled to rotary extraction.

(3) After the mix oil from the rotary extraction enters into 1st evaporator and 2nd evaporator, most of the solvent in the mix oil is separated.

(4) The mix oil from 2nd evaporator goes to stripping tower and almost all the solvent is separated. From the stripping tower, we can get crude oil and solvent. The solvent is sent to condenser and is recycled to rotary extraction.

4. Advantages

(1) High oil yield, obvious economic benefit

(2) Less residual oil rate in the dry meal.

(3) Improving the quality of the meal.

(4) Low processing cost, high labor productivity.

The Main Business Field of Dinter Company

• 10-500T/H oil material first cleaning,drying and storage section turn-key project.

• 100-3000 T/D oil pretreatment, shelling and pre-press workshop turnkey project (soybean hot peeling, bean skin crushing; the soybean extrusion, high oil contained pre-press cake extrusion, and high oil contained embryos puffed; of direct puffed). Rice bran production line turn-key project.

• Leaching workshop turnkey project (Towline extractor, Rotocel extractor, loop type extractor, DTDC separated machine, the full negative pressure evaporation, paraffin wax recovery, leaching workshop degum, phospholipid concentrate).

• 30-1000T/D oil continuous grade two or one physical (chemical) refining production line.

• 10-600T/D sunflower oil, rice bran oil, corn germ oil dewaxing turn-key project

• 10-200T/D Fatty acid esterification production cooking oil production line.

Palm Fruit Processing Line complete equipment:
Palm fresh fruit bunches--Retort sterilization--Threshing--Oil extraction--filter--Dehydration--To refine
Shandong Leader Machinery Co.,Ltd. independent research and development production of canadian Hot sale soybean oil manufacturers for many years, providing a dedicated oil press palm fruit, palm fruit thresher,sterilization pot palm fruit, palm kernel oil press, palm mashed machines.
The canadian Hot sale soybean oil manufacturers which designed and produced by our research institute, is suitable for 3-15 hectares small farm or processing with supplied materials from outside for individual household, economic and practical, cost recovery soon, very welcome by customers in Africa and South America.

Shandong Leader Machinery Co.,Ltd. is one of the leading Manufacturers and Suppliers of canadian Hot sale soybean oil manufacturers.Shandong Leader Machinery Co.,Ltd. manufacture canadian Hot sale soybean oil manufacturers making machine using cutting-edge technology, Shandong Leader Machinery Co.,Ltd. have many kinds of Palm Fruit Processing Line for you reference,such as canadian Hot sale soybean oil manufacturers ,Shandong Leader Machinery Co.,Ltd. can meet your different requirement in Palm Fruit Processing Line.Welcome to contact Shandong Leader Machinery Co.,Ltd.,contact name:Ms.Myra for a quotation
(Tel/whatsapp:0086-18363092712, Email:sales2@ldfoodmachine.com,Skype:leaderfoodmachine2).Welcome to send us your enquiry about capacity for canadian Hot sale soybean oil manufacturers, inform us raw material you want to use for canadian Hot sale soybean oil manufacturers,and specific requirements for canadian Hot sale soybean oil manufacturers.Shandong Leader Machinery Co.,Ltd. will provide you best solution for your project about Palm Fruit Processing Line.