5-80TPH palm oil pressing machine

Introduction of Shandong Leader Machinery Co.,Ltd. Crude Oil Refining Machine
1>. Palm oil mill have main ten parts:Reception Station,Sterilizer,Threshing,Press,Clarification, Kernel Recover, power station, boiler station, water treatment plant, oil storage tank.
2>. Shandong Leader Machinery Co.,Ltd. use the Fresh Fruit Bunch, because the palm fruit rancidity is very fast, if the rancidity will be influence the palm crude oil acid value, if the acid value is very high, the refining eCrude Oil Refining Machineiciency will drop.
3>. Generally speaking, The palm fruit processing plant is best away from the palm orchard.

5-80TPH palm oil pressing machine

1. Main Business Field:

1.10-500T/H oil material first cleaning,drying and storage section turn-key project.
2.100-3000 T/D oil pretreatment, shelling and pre-press workshop turnkey project (soybean hot peeling, bean skin crushing; the soybean extrusion, high oil contained pre-press cake extrusion, and high oil contained embryos puffed; of direct puffed). Rice bran production line turn-key project.
3.Leaching workshop turnkey project (Towline extractor, Rotocel extractor, loop type extractor, DTDC separated machine, the full negative pressure evaporation, paraffin wax recovery, leaching workshop degum, phospholipid concentrate).
4.30-1000T/D oil continuous grade two or one physical (chemical) refining production line.
5.20-600T/D sunflower oil, rice bran oil, corn germ oil making and dewaxing turn-key project
6.10-200T/D Fatty acid esterification production cooking oil production line.
7.30-300T/D palm oil pressing line.
8.100-300T/D Coconut, peanut, sesame oil making project.

2. The processing technology parameter:

3.Reception station of palm oil pressing machine :

The FFB bunch be transported to plant by truck, after be weighted by weighting bridge(30T), the FFB will be loaded down to FFB Loading Ramp.

The iron door of unloading ramp is controlled by hydraulic device, Get the power from Hydraulic pump station. Start on the hydraulic device, iron door be lifted. FFB will fall down to the Palm Fruit screw conveyor, be transported to pre-treatment plant, to Vertical sterilizer.

4. Sterilizing process of palm oil pressing machine :

2.1 By Scraper Conveyor, FFB be transported to the top of sterilizing tank. Falling into sterilizing tank from feed inlet.

2.2 Sterilizing tank: Adopt vertical type sterilizer, Welded up by Q235B material (Chemical composition:C0.12~0.2%,Si0.12~0.3%,Mm0.3~0.7%,P
2.3 After FFB be transported into sterilizing tank (202), close the door of sterilizing tank, and open the vent valve behind the tank, saturating steam, which pressure is 3bar and temperature is around 130℃. After all cool air been discharged out, close vent valve, proceed to sterilizing section. Sterilizing time is 90~120minutes.

2.4 The sterilizing time also should be depend on the kind and quality of FFB, if the pressure is too high or the time is too long, palm fruit will be rot, also Resulting in the loss of oil, high temperature can change palm color.

2.5 Finish sterilizing process, close the steam valve, open the valve lead to Blow-off/down Silencer. Open the sterilizing tank door(FFB outlet) after discharges out all steam and water.

2.6 Open the sterilizing tank door, sterilized FFB will fall on the FFB Scraper conveyor. Be transported to next station.

5. Threshing station of palm oil pressing machine :

The sterilized FFB will be transport to thresher platform by scraper conveyor.

After sterilizing the fresh palm fruit bunch will be soft, and the bunch and fruit will be separate easily.

Sterilized FFB be twisted and knocked in thresher. Palm fruit will be separated from empty bunch totally, fall on Fruit Scraper conveyor though fence, the empty bunch will be transported to Bunch Temporary tank by Bunch Scraper conveyor.

6. Press station of palm oil pressing machine :

Palm fruit press

4.1.1 The palm fruit is transported to Crush tank by fruit elevator.

4.1.2 The fruit in crush tank will be heated to 90~95℃(by indirect steam), crush time is 10~20 minutes.

4.1.3 The pounded fruit flow into Palm fruit oil presser to press. Oil press cone can control cylinder, working pressure is 50~70bar, revolving speed of presser main shaft is 12.5 r/min. Meanwhile the mixture of crude palm oil and water outflow from barrel holes. Crude oil will be flow in Temporary Storage oil tank through crude oil groove. Then oil will be pumped to Screening filter by oil pump. After filtering take out the oil foam, deposit impurities. Palm oil flow into Passivating oil tank. The fiber cake and nucleus are exhausted from clearance of cone head drop on Breaking cake auger.

4.1.4 Palm fruit oil presser, the material of main shaft is 40Cr steel, (Chemical component: C0.37~0.44%,Si0.17~0.37%,Mn0.50~0.80%,Cr0.80~1.10%) have been thermal refining, the material of worm and cone head is 45# Cast-Steel, and the surface have quenching treatment.

7. Palm kernel press of palm oil pressing machine :

4.2.1 From kernel storage tank, kernel be transported to crusher, to be granulate. then conveyed to flaking mill by elevator, granular kernel will be pressed into unified shape. after cooking, palm kernel will be pressed by screw press machine.

4.2.2 Screw press machine operating principle:

1>When oil press is on work, material enters the extruding chamber from the hopper and then moves forwards by the rotating pressing screw and is pressed.

2>Under high temperature condition in the chamber, there is quite strong friction among press screw, chamber and the oil materials.

3>On the other hand, root diameter of the pressing screw carries larger from one end to the other.

4>Hence when rotating, the thread not only pushes particles moving forwards but also turns them outwards as well.

5>Meanwhile, particles adjacent the screw will rotate along with screw’s rotating, causing every particle inside the chamber to possess different speed.

6>Therefore, relative movement among particles creates neat which is necessary during manufacturing because of helping protein change property, damage colloid, increase plasticity, decrease oil’s elasticity, resulting in high oil.

8. Factory introduction of palm oil pressing machine :

Shandong LD Grain&Oil Machinery Co.,Ltd is a large-sized joint-equity enterprise which specialize in producing edible oil mechanical equipment and it is also a group enterprise integrating scientific research, manufacturing, sales as one. Research Institute of Machine Design Company and Jinan, Jinan University of Technology (formerly the Shandong Grain College) school-enterprise cooperation in the oil equipment to carry out long-term, protein extraction, phospholipid extraction, etc. R & D and application of new technologies.

9. Transport of palm oil pressing machine :

10. Certification of palm oil pressing machine :

11. Engineering department of palm oil pressing machine :

12. Lab for palm oil pressing machine :

Reception Station for Crude Oil Refining Machine:
Used for loading palm fruit brunch from plantation,transport to sterilizer. Reception station adopt steel structure and concrete structure. Save equipment cost and construction cost.Have hydraulic control system, hydraulic door open/oCrude Oil Refining Machine automatic achieve continuous operation.Reduce operator, operate more easily and improve work eCrude Oil Refining Machineiciency.

Shandong Leader Machinery Co.,Ltd. is one of the leading manufacturers and Suppliers of 5-80TPH palm oil pressing machine.Shandong Leader Machinery Co.,Ltd. manufacture 5-80TPH palm oil pressing machine making machine using cutting-edge technology, Shandong Leader Machinery Co.,Ltd. have many kinds of Crude Oil Refining Machine for you reference,such as 5-80TPH palm oil pressing machine ,Shandong Leader Machinery Co.,Ltd. can meet your different requirement in Crude Oil Refining Machine.Welcome to contact Shandong Leader Machinery Co.,Ltd.,contact name:Ms.Myra for a quotation
(Tel/whatsapp:0086-18363092712, Email:[email protected],Skype:leaderfoodmachine2).Welcome to send us your enquiry about capacity for 5-80TPH palm oil pressing machine, inform us raw material you want to use for 5-80TPH palm oil pressing machine,and specific requirements for 5-80TPH palm oil pressing machine.Shandong Leader Machinery Co.,Ltd. will provide you best solution for your project about Crude Oil Refining Machine.