Qi'e advanced technology machine for extracting sunflower oil

Introduction of Shandong Leader Machinery Co.,Ltd. Crude Oil Refining Machine
1>. Palm oil mill have main ten parts:Reception Station,Sterilizer,Threshing,Press,Clarification, Kernel Recover, power station, boiler station, water treatment plant, oil storage tank.
2>. Shandong Leader Machinery Co.,Ltd. use the Fresh Fruit Bunch, because the palm fruit rancidity is very fast, if the rancidity will be influence the palm crude oil acid value, if the acid value is very high, the refining eCrude Oil Refining Machineiciency will drop.
3>. Generally speaking, The palm fruit processing plant is best away from the palm orchard.

LD advanced technology machine for extracting sunflower oil

WHAT OILSEEDS ARE AVAILABLE??

WHAT WILL BE PRODUCT OIL LIKE?

WHAT IS THE PROCESSING LIKE?

LD FABRICATING SITE?

HOW TO OPERATE THE MACHINE?

1. When the machines run freely normally, feed small amount of oilseeds uniformly slowly, so as to grind the machine chamber, checking whether it’s normal or not when the cakes come out. If it can’t be discharged smoothly, it may be the reason of too small gap, adjust hand wheel clockwise. If the cakes are discharged too much too fast, adjust hand wheel counterclockwise till it can work normally. Then increase the input capacity gradually, so as to avoid non-uniform feeding, loading rise suddenly, resulting in blockage.

2. The working temperature of press machine depends on the oilseeds variety and humidity. The higher machine temperature is needed if the input material is too dry, on the contrary, the temperature can be lower. Normally, the oil can be extracted out when the machine temperature is about 60℃. The normal production can be started when you can feel it’s hot while you touch the machine body.

3. Adjust the meal thickness to 0.3mm~1.0mm, adjust nut and increase feeding capacity when it reaches requirement.

4. Check the cake discharging frequently during the production. Stop feeding when the cake can’t be discharged smoothly or non-discharging.

5. Clean the slag leakage constantly so as to avoid blocking of oil-way. The recycled slag can be feed back to hopper and press again.

6. During the second pressing, the meal should be broken into 10mm or so pieces, and this can avoid disordered feeding. Normally, soybean is pressed 2 times, peanut and cottonseed can be pressed 2~3 times.

7. The machine should be stopped immediately and clean it, once the metal or other tough substances are found in the chamber.

8. Close the bottom spile in the feed inlet and stop feeding 1~2 minutes before stop the machine. Make screw go backward by 2~3 cycles, so the residues can be discharged.

BRIEF INTRDUCTION OF PRETREATMENT/PRESSING SECTION:

1. Cleaning process: Use vibration cleaning sieve and magnetic selector to get better cleaning effect. And This step is mainly to clean the big impurities, like the stone, big dust iron etc .

2. Crushing Process: This Process is mainly to crush the peanut, as the peanut is big, it is not easy to press. We must crush the peanut to 6-8 pieces.

3. flaking process: After crush and peel, we need to flake the crushed peanut, which make the cell wall of peanut broken. Then it is useful for the oil extracting.

4. cooking process: After the flaker, we need to cook the flaked peanut, control the moisture and the temperature.

5. Pre-pressing: After all the pretreatment , pre- press the peanut, the oil can be extracted about 76%.

WHAT CERTIFICATES DO WE HAVE?

Still have questions?

What should you do??

Do not worry!

SAM is always here!!

Just knock me!!!

Reception Station for Crude Oil Refining Machine:
Used for loading palm fruit brunch from plantation,transport to sterilizer. Reception station adopt steel structure and concrete structure. Save equipment cost and construction cost.Have hydraulic control system, hydraulic door open/oCrude Oil Refining Machine automatic achieve continuous operation.Reduce operator, operate more easily and improve work eCrude Oil Refining Machineiciency.

Shandong Leader Machinery Co.,Ltd. is one of the leading manufacturers and Suppliers of Qi'e advanced technology machine for extracting sunflower oil.Shandong Leader Machinery Co.,Ltd. manufacture Qi'e advanced technology machine for extracting sunflower oil making machine using cutting-edge technology, Shandong Leader Machinery Co.,Ltd. have many kinds of Crude Oil Refining Machine for you reference,such as Qi'e advanced technology machine for extracting sunflower oil ,Shandong Leader Machinery Co.,Ltd. can meet your different requirement in Crude Oil Refining Machine.Welcome to contact Shandong Leader Machinery Co.,Ltd.,contact name:Ms.Myra for a quotation
(Tel/whatsapp:0086-18363092712, Email:[email protected],Skype:leaderfoodmachine2).Welcome to send us your enquiry about capacity for Qi'e advanced technology machine for extracting sunflower oil, inform us raw material you want to use for Qi'e advanced technology machine for extracting sunflower oil,and specific requirements for Qi'e advanced technology machine for extracting sunflower oil.Shandong Leader Machinery Co.,Ltd. will provide you best solution for your project about Crude Oil Refining Machine.