Chemical Material Drying Sterilization Equipment

Chemical raw material microwave dryer features:
1. Selective heating. Because water molecules also absorb microwaves, the higher the water content, the more microwave power is absorbed than the lower water content. This is also the characteristic of selective heating, which can be used to achieve uniform heating and uniform drying.
2, energy efficient. The microwave also acts directly on the material, so there is no additional heat loss. The air in the furnace does not generate heat with the corresponding container, so the thermal efficiency is extremely high, and the production environment is also significantly improved. Compared with far infrared heating, it can be used. Electricity is 30%.
3. Short time and high efficiency. Microwave heating is also a process in which the object to be heated becomes a heating element without heat conduction. The microwave penetrates the inside and outside of the object from all sides and at the same time makes the object reach uniform heating in a short time, which greatly shortens the drying time.
4, easy to control, advanced technology. Compared with the conventional method, the device is ready to use; without thermal inertia, the operation is flexible and convenient; the microwave power is adjustable, and the transmission speed is adjustable. In microwave heating, drying, no waste water, no waste gas, is a safe and harmless high-tech.

Therefore, the chemical industry has been widely used in microwave drying equipment for chemical raw materials, which not only increases production but also reduces costs. It also meets the national environmental requirements.

Technical parameters of chemical raw material microwave drying equipment (example):

1, product model number: 5578212

2, input power: three-phase five-wire 380V ± 10% 50Hz ± 1%

3, microwave output power: 90W (adjustable)

4, microwave frequency: 2450MHz ± 50Hz

5, rated input apparent power: ≤ 135kVA

6, the height of the inlet and outlet: 50mm

7, sodium sulfite microwave drying equipment conveyor belt width: 800mm

8, transmission speed: 0.1 ~ 5m / min

9. Dimensions (length × width × height): about 12500 × 1800 × 1650mm

10, working environment: 0 ~ 40 ° C, relative humidity ≤ 80%

11. Microwave drying equipment efficiency: drying water 90kg per hour

product manual:

Features of chemical raw material microwave drying equipment:

1. Drying speed is fast, and drying is completed in a few minutes. Only a fraction or a fraction of the time of the traditional heating method

2, dry and thoroughly water.

3. The drying temperature is low, and the quality of the sodium sulfite product after drying is good.

4, easy to control, to achieve automated production of microwave heating and drying equipment as long as the operation control control knob can instantly achieve the purpose of lifting and stopping.