Chinese Manufacture! cottonseed oil processing plant

Chinese Manufacture! cottonseed oil processing plant flowchart:
Oilseeds → cleaning → softening → flaking → extrusion → drying → to extraction workshop→DTDC →first and second evaporation →stripping tower →condenser →solvent
recovery

Chinese Manufacture! cottonseed oil processing plant brief introduction:
a. cleaning device for soybean Oil Plant:remove the raw material soybean in various impurities, such as: iron,
stones, clump, such as the plant leaf, clean up till impurity content does not exceed 0.2%.
b.crushing machine for Soybean Oil Plant: soybean is crushed into 6-8 pieces. In order to meet the requirements
of crushing, the soybean is suitable for crushing with the moisture of 7% to 12%.
c. Softening process for Soybean Oil Plant:the purpose of softening is to adjust the moisture and temperature of oil, and make it soft.
d.flaking process for Soybean Oil Plant: rolling raw material into flakes, and the purpose is to increae surface
area, destroy the soybean cell tissue, shorten the way of oil out from cake.
e:Extrusion for Soybean Oil Plant:through high temperature and high pressure, soybean flakes are transfered into expanded pellet, which is easy to extract oil from, and keep high nutritive value.
Chinese Manufacture! cottonseed oil processing plant Extraction process:
1. Solvent pumps for Chinese Manufacture! cottonseed oil processing plant: continuously spray solvent to the rotary-type extractor
2. Roary extractor: Spray and soak the pre-pressed cake with solvent so that oil fats can be diss-olved in solvent(form miscella). After processing, you can get wet meal and miscella (mixed oil).
3. DTDC for Chinese Manufacture! cottonseed oil processing plant: usd to separate the solvent from the wet meal.
4. Miscella tank 1st evaporation for Chinese Manufacture! cottonseed oil processing plant: pump the miscella (oil with solvent) in to the miscella 1st , then add
saline water to it. The phospholipid in the miscella will react with the saline water, at last the reactant
precipitate, reaching the goal of purifying.
5. Miscella tank 2nd evaporation for Chinese Manufacture! cottonseed oil processing plant: the purified miscella will be pumped into it, and use high temperature steam to let solvent evaporate out.
6. Miscella stripping for Chinese Manufacture! cottonseed oil processing plant: it will remove the remaining solvent in miscella. And the solvent will be discharged to condenser for recycling.
7. Condensers for Chinese Manufacture! cottonseed oil processing plant: to cooling the solvent gas separated from the wet meal and miscella for recycling.

cottonseed oil processing plant

1 cottonseed oil processing plant

• Processing Capacity : 10TPD To 1000TPD
• Suitable raw materials: cotttonseed

• Bucket Elevator
• Air selection system
• dehuller ( for some oil seeds)
• crusher
• Flaker
• cooker
• Presser ( Expeller)
• Filter
• Oil storage

Cleaning: Windowing system is used to remove the impurity from cottonseed, such stone, irons etc

Dehuilling : As usual, It needs to remove the cottonseed shells, It will be good for futher processing.

Cracking: Breaker roll or a swinging hammer grinder or a combination of both then breaks the kernel into small fragments. This increases the surface area of the kernels, thus facilitating flaking.

Flaking: The kernel fragments are then subjected to flaking in a roller mill. The thickness of the kernel cakes are subsequently reduced as they travel from the top roller to the bottom. This progressive rolling initiates the rupturing of cell walls.

Cooking: Adjust the moisture content of the meal to an optimum level ;Rupture cell walls (initiated by roiling) ;Ensure that the action of the enzymes that increases the free fatty acids (FFA) of the oil is stopped i.e. Reduces viscosity of the oil; Coagulate the protein in the meal to to facilitate the separation of oil from protein materials.

Screw Press: The properly cooked meal is then fed to the screw press, which consists of an interrupted helical thread (worm) which revolves within a stationary perforated cylinder called the cage or barrel. The meal is forced through the barred by the action of the revolving worms

Shandong Leader Machinery Co.,Ltd. value "honesty, innovative and quality" because Shandong Leader Machinery Co.,Ltd. know that Shandong Leader Machinery Co.,Ltd. are not only supplying equipment to our clients but the partners to help our clients to get a better result.Keeping this in our mind,Shandong Leader Machinery Co.,Ltd. not only make high quality food processing equipment, but also help the clients to figure out the optimum processing work flows,make amendments according to client's specific needs,training staffs for the user of our equipment and even more, because Shandong Leader Machinery Co.,Ltd. believe that our users or clients' success is the foundation of ours.

Shandong Leader Machinery Co.,Ltd. is one of the leading manufacturers and Suppliers of Chinese Manufacture! cottonseed oil processing plant.Shandong Leader Machinery Co.,Ltd. manufacture Chinese Manufacture! cottonseed oil processing plant making machine using cutting-edge technology, Shandong Leader Machinery Co.,Ltd. have many kinds of Soybean Oil Plant for you reference,such as Chinese Manufacture! cottonseed oil processing plant ,Shandong Leader Machinery Co.,Ltd. can meet your different requirement in Soybean Oil Plant.Welcome to contact Shandong Leader Machinery Co.,Ltd.,contact name:Ms.Myra for a quotation
(Tel/whatsapp:0086-18363092712, Email:[email protected],Skype:leaderfoodmachine2).Welcome to send us your enquiry about capacity for Chinese Manufacture! cottonseed oil processing plant, inform us raw material you want to use for Chinese Manufacture! cottonseed oil processing plant,and specific requirements for Chinese Manufacture! cottonseed oil processing plant.Shandong Leader Machinery Co.,Ltd. will provide you best solution for your project about Soybean Oil Plant.